Author: Chris
Date: 7/19/2010 3:57 pm EDT
|
Doing a tile replacement with SnapStone is much simpler than a traditional ceramic tile replacement. There's a video that shows the process on the website, but what you do is remove the grout around the broken tile, cut the tabs off three sides of the broken tile, remove the tile,remove the tabs off three sides of the new tile, apply construction adhesive to the new tile, install the new tile interlocking the side of the tiles with the remaining tabs, place weight on the tile till the adhesive cures or overnight then just regrout. I would watch the video on the website. Hope this helps. Let me know if you have any other questions. |
|