Glenn,
Bought the boat from www.chatleeboats.com , which according to Mercurymarine webpage are certified. So fare I am quite pleased with their service, but I have to trailer the boat 150 miles to bring the boat back to them and I was hoping to avoid that. I would guess though that the engine and DTS, gauges etc are installed by Sea Pro. Read through the installation manual yesterday, and it seems that DTS should be connected directly to the battery. They actually specify to use hex nuts and NOT wing nuts to make sure the connection is good and do not come loose.
I also studied the Smartcraft operation manual, and will try to calibrate the fuel sensor. It seemed to work fine before I filled the tank full, so it might bee only the full level that is not calibrated properly.
|
